Coupon Code: SAVE$50. For questions call us at (805) 798-0008

Installation Help

Installation Video

The video walks you through the installation once the strut channels are attached to the ceiling and the motors are hung up
In case there is problems with the adjustment or a different minimum and maximum height than the default presetting (motors don't run and there is clicking) we recommend to turn all the 4 adjustment switches Counter-Clockwise (To the left) 20 times and repeat that until the motors run again 
Tip: When adjusting the top limit (maximum height) lower the lift 1-2 ft. from the highest point the lift will go and then turn the outside adjustment switches
When adjusting the top limit (maximum height) lower the lift 1-2 ft. from the lowest point the lift will go and then turn the inside adjustment switches
Help: (805) 807-0184
Parts of the manual: You want to have a footprint on the ceiling of 5 ft. (width) x 9 ft. (length) (8.5 ft. will work too) You can have light fixture/fire sprinklers/alarm devices in the 5x5 ft. mounting frame. The mounting frame is a square consisting of the two motors and strut channels
A different view