The Attic-Lift (Incl. Seal & Remote)
$2,245
Our motorized lifting platform maximizes the storage potential of your entire house. Say goodbye to pricey storage units and say hello to a clutter free home with items safely stored away in the attic. The Attic-Lift comes in various sizes, colors, and lifting capacities, allowing you to modify your overhead storage to fit your needs.
- EASY INSTALL! Only attach two motors and two struts on the attic-floor
- No obstructing posts/rails in the attic like conventional attic lifts
- NEW: Includes frame to seal the ceiling - Fully adjustable to accommodate all joists sizes from 2×4 To a 2×16 or TJIs. Platform size: 28.75" x 56" (OPENING: 30.5" x 58.5")
Cable Extension [for Attic-Lift]
Extra Remote Control
Installation Services
$2,245
or
The Attic-Lift (Incl. Seal & Remote)
Write a review
Thank you!
A review has been submitted.
The Attic-Lift (Incl. Seal & Remote)
General specs
- Model: Attic-Lift 1400 Attic-Lift 1600
- Lifting Capacity: Up to 400 lbs Up to 600 lbs
- Max. Travel Distance1: 16 ft 22 ft
Ceiling Support
- Type: (2) 1 5/8" x 60" strut channel
- Fasteners: (8) 5/16" x 4" SPAX© Lag Bolts
- Mounting Area: 5' x 5' over 3 joists/rafters
- Cable: 1/8” Vinyl-coated Steel 7x19 3/16” Vinyl-coated Steel 7x19
- Cable Strength2: 2,000 lbs 4,200 lbs
Operating Requirements
- Switch Voltage: 110V / 120V
- Transmitter: 433.92 MHz
- Electrical Cord: 10 FT / 16 gauge / NEMA 5-15
- Min. circuit size: 15 amp
Platform Specs
- Frame: T-slotted framing rail
- Material: 6105-T5 aluminum alloy
- Deking: 3/4 in thick Oak veenered plywood (5-ply)
Motors
- Type: IP44 (T-Motor)
- Rated Power: 235 W 680 W
- Rated Current: 2.2 A 6.0 A
- Voltage / Phase: 100-120V AC / Single
- Duty Cycle @ Max. Capacity: 3 min on, 15 min off3
Size and Weight
- Platform Size: 20.75 in x 44 in 28.75 in x 56 in
- Ceiling Cutout Size: 22.5 in x 46.5 in 30.5 in x 58.5 in
- Weight:
What's in the box
- 2 Motors
- Controller
- Remote Control
- 2 C-Strut Channels
- Platform
- Mounting Hardware
Description | Part # | Qty |
---|
1We offer multiple cable length versions. E.g. The 400 lbs version can be equiped with a cable length to allow 16 ft of travel.
2Ultimate tensile strength
3If you run the Attic-Lift continously for more than 3 min at a time, the motors will switch off automatically and require to cool down for 15 min or less.
The Attic-Lift (Incl. Seal & Remote)
Heavy Duty Storage Solution
Features & Benefits
-
No heavy lifting
Eliminate the safety hazard of carrying heavy items up and down the pull-down stairways. Your bulkiest items can vanish from your garage floor and be safely stored up in your attic with our DIY attic lift system.
-
Wireless Remote-Control
This attic hoist is equipped with an easy to use remote control allowing you to lower/raise your items. Programmable stopping points allow you to set high and low point parameters preventing your items hitting the floor.
-
Safety
The robust attic lift system comes with a wide variety of safety features:
- Self-leveling platform: The controller monitors and adjust cable speeds to keep platform level.
- Stop Limit: The attic-lift monitors weight on lift preventing you from overloading it.
-
Custom Platform Sizes
Besides our two standard sizes of 20.75" x 44" and 28.75" x 56", we offer custom platform sizes per your request.
All-Purpose
Platform Design
Our Horizontal Snap-In Load-Securing Track that can be customized to fit your garage storage needs.
Platform size
The Attic-lift comes in two standard sizes. In addition, we offer custom sizes that meet your specific storage needs.
* Min. ceiling opening dimensions. Opening may be larger.
Platform Frame
The platform frame is constructed with a versatile T-slotted framing rail made from 6105-T5 aluminum alloy. The long sides are made with 2 x 1 solid double T-slot and the short sides use 1 x 1 solid T-slotted beams.
- Material: 6105-T5 Aluminum
- Finish: Anodized Silver
- Tensile Strength: 35,000 psi
Decking
The attic-lift is sheathed with a beautiful 3/4 in thick Oak veneered plywood sheet (5-ply).
Powerful motors
The Attic-Lift uses two tubular motors that are synced via the control unit to ensure the platform stays level.
Both motors are mounted on steel strut channels which are anchors via lag screws on your attic's floor joists/rafters.
Easy installation
We know that installing an attic storage lift may seem intimidating. Don’t worry. The DIY attic lift system was designed to be easy to install, and this guide includes everything you need for the installation process. If any step in this guide is unclear, watch our installation videos. If you do not feel comfortable performing any step yourself, please contact a handyman. Before starting, make sure to have reviewed the entire manual.
Download ManualStrength in Numbers
Compare our DIY attic lift system to the competition. You‘ll see why we come out on top.
Attic-Lift
|
The Attic Lift™ |
Aladdin Lift™ |
Versa Lift™ |
|||
Custom Sizing | ||||||
---|---|---|---|---|---|---|
Flush mounted to ceiling joists | ||||||
Comes standard w/ Wireless Remote Control | ||||||
Programmable stopping points | ||||||
DIY Installation | ||||||
Works with all roof pitches | ||||||
Includes all hardware (incl. plywood decking) | ||||||
Doesn't require a ramp to load platform | ||||||
Assembled in the USA | ||||||
Doesn't require a steel frame or wood posts | ||||||
Adjustable Ratchet strap attachment points | ||||||
Max. Vertical Travel Distance | 21.5 ft1 | 10 ft | 16 ft | 18 ft | ||
Lifting capacity | 400 lbs | 300-700 lbs | 500 lbs | 200 lbs |