Attic Lift
$2,245
Our motorized lifting platform maximizes the overhead storage potential of your garage. The Attic-Lift comes in various sizes, colors, and lifting capacities, allowing you to modify your overhead storage to fit your needs.
- A fast install (just 2 motors on the long side and 2 struts on the short side of the opening)
- Pre-Assembled Platform made of sturdy Aluminum and high-quality wood
- Modernize your home, Lifts safely up to 400 lbs.
- Includes Remote
- The opening can be larger than our platform sizes (up to 50" wide and 55" deep)
Get the most out of your Attic-Lift. Our lifts come standard with 12 ft of travel distance. If you have extra tall ceilings, we offer the option to have cable pre-spooled on the lift to allow up to 24 ft of travel.
![Cable Extension [for Attic-Lift]](http://cdn.shopify.com/s/files/1/2180/6327/products/R6__8388_48ae5629-5301-4a5d-a7be-755df591cefe_128x128_crop_center.jpg?v=1626504840)
Cable Extension [for Attic-Lift]
Cable Extension [for Attic-Lift]
Extra Remote Control
Extra Remote Control
Additional hardware Kit
Additional hardware Kit
Additional hardware Kit
-The Auxx-Lift can be mounted on any ceiling and comes with all the hardware. THIS KIT IS OPTIONAL: The Long (8 ft.) side of the platform running parallel to the ceiling joists, is the standard set-up. If you want the lift's 4x8 platform to run perpendicular to your joists you will need this kit. This additional kit will turn the platform 90 Degrees
$2,245
or
Attic Lift
Attic Lift
General specs
- Model: Attic-Lift 1400 Attic-Lift 1600
- Lifting Capacity: Up to 400 lbs Up to 600 lbs
- Max. Travel Distance1: 16 ft 22 ft
Ceiling Support
- Type: (2) 1 5/8" x 60" strut channel
- Fasteners: (8) 5/16" x 4" SPAX© Lag Bolts
- Mounting Area: 5' x 5' over 3 joists/rafters
- Cable: 1/8” Vinyl-coated Steel 7x19 3/16” Vinyl-coated Steel 7x19
- Cable Strength2: 2,000 lbs 4,200 lbs
Operating Requirements
- Switch Voltage: 110V / 120V
- Transmitter: 433.92 MHz
- Electrical Cord: 10 FT / 16 gauge / NEMA 5-15
- Min. circuit size: 15 amp
Platform Specs
- Frame: T-slotted framing rail
- Material: 6105-T5 aluminum alloy
- Deking: 3/4 in thick Oak veenered plywood (5-ply)
Motors
- Type: IP44 (T-Motor)
- Rated Power: 235 W 680 W
- Rated Current: 2.2 A 6.0 A
- Voltage / Phase: 100-120V AC / Single
- Duty Cycle @ Max. Capacity: 3 min on, 15 min off3
Size and Weight
- Platform Size: 20.75 in x 44 in 28.75 in x 56 in
- Ceiling Cutout Size: 22.5 in x 46.5 in 30.5 in x 58.5 in
- Weight:
What's in the box
- 2 Motors
- Controller
- Remote Control
- 2 C-Strut Channels
- Platform
- Mounting Hardware
| Description | Part # | Qty |
|---|
1We offer multiple cable length versions. E.g. The 400 lbs version can be equiped with a cable length to allow 16 ft of travel.
2Ultimate tensile strength
3If you run the Attic-Lift continously for more than 3 min at a time, the motors will switch off automatically and require to cool down for 15 min or less.
Added to cart Continue shopping
Attic Lift
Looking for Accessories
Heavy Duty Storage Solution
Features & Benefits
-
No heavy lifting
Eliminate the safety hazard of carrying heavy items up and down the pull-down stairways. Your bulkiest items can vanish from your garage floor and safely stored up in your attic.
-
Wireless Remote-Control
Equipped with an easy to use remote control allowing you to lower/raise your items. Programmable stopping points allow you to set high and low point parameters preventing your items hitting the floor.
-
Safety
The robust lifter comes with a wide variety of safety features:
- Self-leveling platform: The controller monitors and adjust cable speeds to keep platform level.
- Stop Limit: The attic-lift monitors weight on lift preventing you from overloading it.
-
Custom Platform Sizes
Besides our two standard sizes of 20.75" x 44" and 28.75" x 56", we offer custom platform sizes per your request.
All-Purpose
Platform Design
Our Horizontal Snap-In Load-Securing Track that can be customized to fit your garage storage needs.
Platform size
The Attic-lift comes in two standard sizes. In addition, we offer custom sizes that meet your specific storage needs.
* Min. ceiling opening dimensions. Opening may be larger.
Platform Frame
The platform frame is constructed with a versatile T-slotted framing rail made from 6105-T5 aluminum alloy. The long sides are made with 2 x 1 solid double T-slot and the short sides use 1 x 1 solid T-slotted beams.
- Material: 6105-T5 Aluminum
- Finish: Anodized Silver
- Tensile Strength: 35,000 psi
Decking
The attic-lift is sheathed with a beautiful 3/4 in thick Oak veneered plywood sheet (5-ply).
Powerful motors
The Attic-Lift uses two tubular motors that are synced via the control unit to ensure the platform stays level.
Both motors are mounted on steel strut channels which are anchors via lag screws on your attic's floor joists/rafters.
The ultimate storage solution
Our motorized lifting platform maximizes the storage potential of your entire house. Say goodbye to pricey storage units and say hello to a clutter free home with items safely stored away in the attic. The Attic-Lift comes in various sizes, colors, and lifting capacities, allowing you to modify your overhead storage to fit your needs.