DIY Attic Lift System | Attic Storage System | Auxx-Lift – Auxx-Lift Store
New Website Design!
Order tracking Buy

Garage Storage Solution

ATTIC-LIFT

Industry leading Strength & Safety
  • Store rarely used items in your Attic.
  • No heavy lifting — Safely lift up to 600 lbs.
  • Standard and Custom sizes available

The ultimate storage solution

Our motorized lifting platform maximizes the storage potential of your entire house. Say goodbye to pricey storage units and say hello to a clutter free home with items safely stored away in the attic. The Attic-Lift comes in various sizes, colors, and lifting capacities, allowing you to modify your overhead storage to fit your needs.

24/7
Easy to use
24/7
Remote-controlled
24/7
DIY installation
24/7
Safe and Secure

Which lift is right for you? Compare side-by-side here

Heavy Duty Storage Solution

Features & Benefits

  • No heavy lifting

    Eliminate the safety hazard of carrying heavy items up and down the pull-down stairways. Your bulkiest items can vanish from your garage floor and be safely stored up in your attic with our DIY attic lift system.

  • Wireless Remote-Control

    This attic hoist is equipped with an easy to use remote control allowing you to lower/raise your items. Programmable stopping points allow you to set high and low point parameters preventing your items hitting the floor.

  • Safety

    The robust attic lift system comes with a wide variety of safety features:

    • Self-leveling platform: The controller monitors and adjust cable speeds to keep platform level.
    • Stop Limit: The attic-lift monitors weight on lift preventing you from overloading it.
  • Custom Platform Sizes

    Besides our two standard sizes of 20.75" x 44" and 28.75" x 56", we offer custom platform sizes per your request.

Get started with an Attic Lift today Shop Attic-Lift

All-Purpose

Platform Design

Our Horizontal Snap-In Load-Securing Track that can be customized to fit your garage storage needs.

Platform size

The Attic-lift comes in two standard sizes. In addition, we offer custom sizes that meet your specific storage needs.

22.5" x 46.5" Cutout*
20.75" x 44"
30.5" x 58.5" Cutout*
28.75" x 56"

* Min. ceiling opening dimensions. Opening may be larger.

Platform Frame

The platform frame is constructed with a versatile T-slotted framing rail made from 6105-T5 aluminum alloy. The long sides are made with 2 x 1 solid double T-slot and the short sides use 1 x 1 solid T-slotted beams.

  • Material: 6105-T5 Aluminum
  • Finish: Anodized Silver
  • Tensile Strength: 35,000 psi
Double T-Slot
Double Solid T-slot Beam
Decking

The attic-lift is sheathed with a beautiful 3/4 in thick Oak veneered plywood sheet (5-ply).

Double T-Slot
Double Solid T-slot Beam

Powerful motors

The Attic-Lift uses two tubular motors that are synced via the control unit to ensure the platform stays level.

Both motors are mounted on steel strut channels which are anchors via lag screws on your attic's floor joists/rafters.

  • 1
    Motors

    The Attic-Lift runs on typical household 100-120V AC, drawing 2.3 amps.

  • 2
    Aircraft Cables

    The attic storage system is hoisted by four hot-dipped galvanized 7x19 steel cables made from 133 wires each. The cables are wrapped in a vinyl coating which not only protects your hands but also seals in any lubrications, increasing its useful life.

  • 3
    Vertical Travel Distance

    We offer three versions of this attic elevator, allowing for 13 ft, 16 ft, and 18 ft vertical travel distances, respectively.

Get started with an Attic Lift today Shop Attic-Lift

Easy installation

We know that installing an attic storage lift may seem intimidating. Don’t worry. The DIY attic lift system was designed to be easy to install, and this guide includes everything you need for the installation process. If any step in this guide is unclear, watch our installation videos. If you do not feel comfortable performing any step yourself, please contact a handyman. Before starting, make sure to have reviewed the entire manual.

Download Manual

Strength in Numbers

Compare our DIY attic lift system to the competition. You‘ll see why we come out on top.

Attic-Lift
by Auxx-Lift

The Attic Lift™

Aladdin Lift™

Versa Lift™

Custom Sizing
Flush mounted to ceiling joists
Comes standard w/ Wireless Remote Control
Programmable stopping points
DIY Installation
Works with all roof pitches
Includes all hardware (incl. plywood decking)
Doesn't require a ramp to load platform
Assembled in the USA
Doesn't require a steel frame or wood posts
Adjustable Ratchet strap attachment points
Max. Vertical Travel Distance 21.5 ft1 10 ft 16 ft 18 ft
Lifting capacity 400 & 600 lbs 300-700 lbs 500 lbs 200 lbs

1 Attic-Lift with 400 lbs lifting capacity has a max. vertical reach of 18 ft.

Get started with an Attic-Lift today

Shop Attic-Lift
Account Menu
0 $0
Top