Switch orientation of Auxx-Lift rails to run parallel with roof joists.
Auxx-One
Addons
Extra high ceilings ?
Increase your vertical travel distance from standard 12' to 18' with this cable extension.
Extra remote?
Get an additional wireless remote for your lift. Can be programmed to your existing or new Auxx-Lift or Attic-Lift.
Auxx-Lift
Maximize the overhead storage potential of your garage with the motorized storage lifter.
Our single motor lifter is the ideal storage solution for a wide variety of heavy, bulky items like Truck Tops, Jeep Tops, Rooftop Tents, Canoes, Kayaks, Fifth Wheel Hitch, Bikes, and many more. Thanks to our powerful motor with 400 lbs lifting capacity. All controlled via our wireless remote control.
Product details
General specs
- Model: Auxx-One 1400
- Lifting Capacity: Up to 400 lbs
- Max. Travel Distance1: 22 ft
- Weight:
- Speed: Avg. 30 seconds for 9' ceilings
Ceiling Support
- Type: (2) 1 5/8" x 30" strut channels
- Fasteners: (6) 5/16" x 4" SPAX© Lag Bolts
- Cable: 3/16” Vinyl-coated Steel 7x19
- Cable Strength2: 4,200 lbs
Operating Requirements
- Switch Voltage: 110V / 120V
- Transmitter: 433.92 MHz
- Electrical Cord: 10 FT / 16 gauge / NEMA 5-15
- Min. circuit size: 15 amp
E-Beam Lifting Frame
- Height: 5 inches
- Length: 5 ft
- Material: Galvanized Steel
- Slot Spacing: 2 in on center
Motor
- Type: IP44 (T-Motor)
- Rated Power: 680 W
- Rated Current: 6.0 A
- Voltage / Phase: 100-120V AC / Single
- Tube Diameter: 70mm (2-3/4 in)
- Motor speed: 13 rpm
- Duty Cycle @ Max. Capacity: 3 min on, 15 min off
What's in the box
- 1 Motor
- Controller
- Remote Control
- 2 C-Strut Channels
- E-Beam
- Mounting Hardware
1The Auxx-One can be equiped with a cable length to allow 22 ft of travel distance.
2Ultimate tensile strength
3If you run the Auxx-One continously for more than 3 min at a time, the motors will switch off automatically and require to cool down for 15 min or less.