09 Adjust motor Part 2

09 Adjust motor Part 2

09 Adjust motor Part 2
  • 1

    Ceiling adjustment: Check to see if the motor stopped and white LED is turned on at controller.

  • 2

    If no, activate the controller by using the remote control and perform the following steps: Press down – 3, hold and stop after 2”; then press Stop – 2; Press up – 1 and let the lift run until lift stops by itself.

  • 3

    b. If yes, turn outside switches in (+) direction until the lift is at the desired height and levelness.

2022 & NEWER: Inside switches are for ceiling adjustment and outside switches are for floor adjustments. Clockwise ("righty") is plus and counter-clockwise ("lefty") is minus.
Sidebar   Live Chat Account Menu
0 $0
Top